Dryer Vent Cleaning Can Prevent a Fire and Save Money


Most people clean out the lint trap inside their dryer after every load of clothes. The duct work from the house also construct lint. Lint interior drier vents is merely a fire hazard and may decrease a drier’s performance. Annual cleanup and/or review of these vents by specialist dryer port cleaner is suggested. Eliminating the hose out of the drier is essential to wash and inspect vents. What’s more, the duct work from domiciles could be more than real estate owners may wash themselves.

It’s urged that dryer vents have been cleaned and inspected yearly but there are a variety of signs they have to be cleaned clean dryer vent.

Caution signs include

Your clothes take more than normal to dry
Outfits Truly Feel warmer than normal in the Decision of a drying cycle
The flapper about the port about the Exterior of this house remains closed if the dryer is on

Repairing the vents in the drier is every bit as crucial for a whole lot of factors. Lint is quite flammable. If ducts are restricted by saltwater build-up, abnormal heating can build up. If airflow is limited, your dryer should work more tough and may take more than 1 cycle to wash clothing which utilizes extra vitality. Your attire will shortly endure a lot more wear and tear in case it generally takes more time to dry them due to vents which are limited.

There are measures you can take to decrease the possibility your dryer vents finally become restricted by means of lint.

Rigid metallic duct function is not as prone to lint accumulation therefore re-place foil or plastic duct work with rigid or semi rigid rigid metal duct work
Sterile or substitute the elastic tubing between your wall together with your apparatus frequently
Don’t run a dryer that does not Have a lint filter
Wash the lint trap amongst each and every load of laundry.
Clean lint traps Each couple of weeks to remove residue Produced from fabric softeners
Make sure that the outdoor vent flap gets the capacity to open freely (it May Get restricted by rain, snow, etc.. )

Closet upkeep tips

Keep dryers in great working order.
Hats should Be grounded
Prevent overloading your dryer
Don’t store combustible chemicals near your apparatus
Don’t store flammable Things like clothing or boxes near your unit
Don’t operate your dryer when You’re not dwelling
The minimum diameter for drier canals is 4″

Home Inspection Tip – Dryer Vent Safety


When a home inspector looks for fire hazards or electrical problems, he’ll probably come up with things you hadn’t thought of. You might be surprised how many things you can take care of yourself, without having to call in a professional contractor.

One such example is clothes dryer vent maintenance. Most clothes dryer vent ducts are short in length and can be cleaned and maintained by any home owner. On the other hand, there are some long ducts that run twenty feet or more in crawl spaces or in non-floored attics which should be taken care of by a professional with special duct cleaning equipment dryer duct cleaning.

Our focus here is on maintenance steps you can do yourself. You’ll know the vent needs cleaning if any of the following are happening.

* Clothes are still damp at the end of a normal cycle.

* Clothes are hotter than usual at the end of the cycle.

* Clothes have a musty smell after drying.

* A great deal of lint is escaping from the back of the dryer.

* The flapper on the vent exhaust hood doesn’t open when the dryer is running

* A lot of lint covers the vent exhaust hood.

Here are several simple steps you can take.

* Clean the lint filter before and after every drying cycle.

* Replace a vinyl duct with a ridged or flexible metal duct. (That’s because the metal duct creates less lint buildup at the bends and is a safer duct.)

* For safety reasons, never leave the dryer running when you leave the house or go to bed. (You don’t want to take the chance of a fire starting.)

Cleaning the duct isn’t difficult. The hardest part is pulling the dryer out from the wall to disconnect the duct.

The duct likely goes from the back of your dryer directly through the wall of the house to the outside. Once you’ve disconnected the duct, take it outside so lint doesn’t get all over everything. Use a shop vac or a regular house vacuum to vacuum the duct out from each end. If you don’t have a vacuum, you can tie a toilet brush to a rope and pull it through the vent. This method does a pretty good job.

Next check the back section of the dryer for lint buildup. Then check the vent discharge cap and flapper for any lint buildup or blockage. The most important thing here is to allow for good air flow through the vent. Your dryer will perform better, and you’ll have peace of mind concerning safety.

Here’s an important note if your dryer is gas operated. Always turn off the gas valve before working on the dryer. It may be necessary to turn off the gas by using the small valve at the dryer gas line. Then you can disconnect the gas line and pull the dryer away from the wall. Be careful you don’t damage the flexible gas line when you’re pulling the dryer out from the wall.

Once you’ve cleaned the duct and dryer and have everything back in place, you’ll have a feeling of accomplishment. Not only have you saved yourself money you might have otherwise paid a repairman, but you’ll have done one more thing to make your home more livable for you or for the party who may be buying it.