A Brief History For Control Valves


It’s certain that the evolution of control valves is closely linked to the industrial procedure. It is true that in early times, people have come up with the idea of regulating. People attempt to modulate the flow of water from rivers or streams by using big rocks or tree trunks to obstruct the stream of water or change water flow direction at that moment. And even there are a few simple original valves utilized for crop irrigation from Egyptian and Greek culture. Later, Romans developed a complex water system for crop irrigation and properly used plug in and plunger valves to prevent the reflux. Subsequently the Industrial Revolution has proposed the development to another stage. James Watt invented the first rate controller adjustment. People at the time tended to cover more attention on the regulation of flow.

A pump , since the fist control kplokusa.com valve, was invented by William Fisher in 1880. This is a sort of self-control valve with a heavy hammer. After the pressure rises, the valve gap declines under the effect of the heavy hammer as a way to reach a constant pressure. Throughout the 1920s, ball valves will be the hottest ones, along with single-port and double-ported globe valves with V-notch. When it was 1940s, diaphragm valves and butterfly valves came into being to restrain the mass flow. The valve positioner was developed then. Throughout the 1950s, three way cage and valves valves were performed out to meet high requirements. Back in 1970s, cage valves, especially the eccentric plug valves had been popular in many fields in industrial procedure. When stepping to the 21st century, Field bus control valve has been applied. And it is sure the demand of the controller valves would be higher in the future.

Control valves and the double block and bleed function evolution of industrial processes developed simultaneously. To enhance the control quality, it’s sure to take specific requirements on control system and all the composition of the constituent parts. As the entire society keeps a quick pace, so it is essential to grasp the complex technologies and apply them to training. It’s clear to build up all the time. Otherwise, the whole industry, although the whole society would not progress.